Why You Should Have More Than One SAAB Replacement Key
Keeping an extra key can save you a lot of time and hassle. Especially when your key fob stops working without explanation. The most frequent reason for an unresponsive key fob is the battery is dead. However there are other reasons as well.
The cost of putting in the new key to a car at an auto dealer could be around PS1500 and can take up to 10 days.
Transponder key
A transponder key is a key for cars that has an electronic chip inside of the key fob. The chips utilize radio signals to communicate with the immobilizer of your vehicle. These keys are designed to stop theft by making it more difficult for thieves to start the vehicle. A transponder key will assist in locating your stolen car. This is because, when you insert the key into the immobilizer it will transmit a signal through the GPS to your vehicle.
Most new cars now come with a transponder key which is a valuable anti-theft feature. Older vehicles may not come with these features. If your old car doesn't have a transponder key it is possible to purchase one from an auto dealership. A new transponder is typically more affordable than a conventional "blade key".
You can purchase an alternative key online or at an auto dealer. The key must be programmed by a locksmith, which can be accomplished by a locksmith or an authorized dealer. The process usually takes only a few minutes and is a fraction of what you'll pay at the dealership. It's important to have a spare car key in the event that you lose your original, or to ensure you can start your car in an emergency. If you attempt to start your car without a working car key could harm the ignition system and stop it from turning back on.
Keys that are wired
If you are a Saab owner, you should always have more than one key for your vehicle. The dealer will need an extra tool to work on older vehicles. However, you can make it yourself for less than 200 dollars if have the proper parts. To get a second key, you will need a replacement case and a new transmitter+transponder, but you can find these for a lot less than the dealer charges.
The batteries of these remotes can be depleted over time. It is important to change them regularly and it's not difficult to do so. You will need a small flathead as well as patience. Place the screwdriver in the slot in middle of the case, and then gently open it. After the case is divided it is possible to access the electronics.
The shift and space-bar keys contain a copper wire beneath them that connects the pressure pad to electronics. The wire that is on the key could block the vehicle from recognizing it. The wire also connects the key to the ignition. Remove it before replacing the key.
Remote key
The 03-11 SAAB 9-3 is among the most beautiful automobiles on the market however, it can be a bit of a pain to use. Key fobs can be somewhat fragile and the buttons may become sticky. Fortunately, there's an easy solution: replace the key case by yourself.
To do this you'll need a brand new key and an extra case that you can buy at the majority of auto parts stores. You'll require an flathead screwdriver as well as an entirely new key to get rid of the old electronic components. When removing the electronic components, be sure to do it in a gentle manner. They are easily damaged.
After you've removed all electronics, you can make use of a small screwdriver to split the case open. You'll need to be as gentle as you can so that you don't hurt the plastic. Once saab car keys opened the case you will be clear about the battery clearly and take it out it easily.
Most used Saabs only come with a single key. A second key requires a special computer (often called the CIM) as well as an additional key and special programming in order to convince the vehicle that you are not trying to steal the vehicle. The cost of all this is a lot, and most locksmiths won't do it. You can do it yourself, provided you're lucky to find the right components at a reasonable price.
Keyless entry
It's a good idea to have a spare Saab key, whether your car has an alarm or not. It's simple to duplicate a classic metal car key however, it's a lot more difficult to steal a car equipped with the newer key-fob-based immobilizer. The older style metal keys don't come with security features. Modern keys have security features.
First, you must remove the emergency key. You'll require a screwdriver for this, so be sure you have one. After you have removed the emergency key, use a flathead to split open the case. This will allow you to look inside the battery, and replace it.
After the battery replacement is in place and the battery is in place, you can put it back together on the key fob. Make sure to align all the components and the limiters, which hold the battery in position. When you're done then you can insert the key into the ignition and resynchronize the car. Then, you're ready to go! This is an easy method to save money while keeping your vehicle secure. Make sure that the replacement battery is the same label as the original and is compatible. The key will not function properly if it is not identical to the original.